Diehl Metering SHARKY 775 Instrucciones De Montaje página 51

Deutsch
English
Main loop (1)
Attention: Overview applies to heat meters and cooling meters only
Sequence Window 1
1.1 Accumulated energy
1.2 Volume
1.4 Flow
1.5 Power
1.6 Flow/return flow temperature
1.7 Differential temperature
1.8 Operating days
1.9 Error status
1.10 Display test
Due date loop (2)
Sequence Window 1
2.1 Due date 1 date
2.2 "Accd 1"
2.3 Due date 1 previous
year date
2.4 Due date 2 date
2.5 "Accd 2"
2.6 Due date 2 previous
year date
2.7 Due date 1
2.8 Due date 1 previous year
2.9 Due date 2
2.10 Due date 2 previous year
2.11 Due date 1
2.12 Due date 1 previous year
2.13 Due date 2
2.14 Due date 2 previous year
Information loop (3)
Sequence Window 1
3.1 Actual date
3.2 "Sec_Adr"
3.3 "Pri_Adr 1"
3.4 "Pri_Adr 2"
3.5 "Inlet" / "Outlet" * (installation
position)
Window 2
Due date 1 energy
Date of future due date 1
Due date 1 previous year
energy
Due date 2 energy
Date of future due date 2
Due date 2 previous year
energy
Pulse input 1
Pulse input 1
Pulse input 1
Pulse input 1
Pulse input 2
Pulse input 2
Pulse input 2
Pulse input 2
Window 2
Time
Secondary address
Primary address 1
Primary address 2
depending on the setting (see 6.1 page 36)
Window 3
"Accd 1"
"Accd 1L"
"Accd 2A"
"Accd 2L"
Volume pulse input 1
Volume pulse input 1
Volume pulse input 1
Volume pulse input 1
Volume pulse input 2
Volume pulse input 2
Volume pulse input 2
Volume pulse input 2
-51-