Publicidad
Idiomas disponibles
Idiomas disponibles
4.2 Setting the date and time
1. After the new batteries are activated, the year number flashes in
the display. You can advance the year by pressing the "M" button. To
confirm and then set the month, press the time button.
2. You can now set the month using the "M" button. To confirm and
then set the day, press the time button.
3. Please follow the instructions above to set the day, hour and min-
utes.
4. Once you have set the last minute and pressed the time button, the
date and time are set and the time is displayed.
5. If you want to change the date and time, press and hold the time
button down for approx. 3 seconds until the year number starts to
flash. Now you can enter the new values as described above.
4.3. Tube connection
Insert the cuff tube into the opening on
the side of the monitor indicated by the
drawing of a cuff.
4.4. Select the measuring mode: standard or averaging mode
This instrument enables you to select either standard (single measure-
ment) or Averaging Mode (automatic triple measurement). To select
standard mode, push the switch on the side of the instrument down-
ward to Position "1" and to select Averaging mode, upwards to
Position "3". If you select 1 then only one measurement will be taken.
If you select 3, the unit will inflate and deflate three times resulting in
one final average measurement.
17
Publicidad
