Publicidad
Idiomas disponibles
Idiomas disponibles
5.7. Memory: reviewing readings
At the end of a measurement, this monitor automatically stores each
result with date and time. This unit stores 99 memories for each of 2 users.
Viewing the stored values
With the unit off, press the "M" button. The display first shows "A",
then shows an average of all measurements stored in the unit. Please
note: Measurements for each user are averaged and stored separately.
Be certain that you are viewing the measurements for the correct user.
Pressing the "M" button again displays the previous value. To view a
particular stored memory, press and hold the "M" button to scroll to
that stored reading.
Memory full
When the memory has stored 99 results a new measured value is
stored by overwriting the oldest value.
Clear all values
If you are sure that you want to permanently remove all
stored values, hold down the "M" button (the instrument
must have been switched off beforehand) until "CL"
appears and then release the button. If you do not want
to clear the values, press the ON/OFF/START button. To
permanently clear the memory, press the "M" button
while "CL" is flashing.
1
Individual values cannot be cleared.
5.8. Stopping a measurement
If it is necessary to interrupt a blood pressure measurement for any
reason (e.g the patient feels unwell), the START/STOP button can be
pressed at any time. The device then immediately lowers the cuff pres-
sure automatically.
25
Publicidad
