KRESS KUD12 Manual De Instrucciones página 11

APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and
application.
The workpiece must be clamped tightly before it is cut.
Pic
Sawing
Sanding
Rasping
Removing
grout
Scraping
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade,
rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
Description
Universal Metal/Wood End Cut
Blade
Standard Wood End Cut Blade
Precision Wood Cut Blade
HSS Semicircle Saw Blade
Sanding Pad (Perforated)
Sanding Finger Pad
Triangular Carbide Grit Rasp
Carbide Rasp (Finger Shaped)
Carbide Grit Semicircle Saw Blade
Diamond-Coated Semicircle Saw
Blade
Rigid Scraper Blade
Flexible Scraper Blade
Application
Wood, plastic, fiberglass, nails,
non-ferrous metals, thin sheet metal,
hardened fillers
Wood, plastic, drywall
Wood, soft plastics
Thin wood, plastic, fiberglass, non-
ferrous metals, thin sheet metal,
hardened fillers, window glazing
Wood, plastic, hardened fillers
Wood, plastic, hardened fillers
Wood, hardened adhesives, thin set,
masonry
Wood, hardened adhesives, thin set,
masonry
Grout, porous concrete, masonry
Ceramic and stone tile, backer board
Old paint, hardened adhesives, caulk,
carpet
Elastic sealants, paint, adhesive
residues, carpet.
11
EN