KNF N952KTE-W Manual De Instrucciones página 68

Safety
Diaphragm pump N952KTE-W N952KT.29E-W
2.2 Responsibility of the operator
The pumps are produced in accordance with the generally
recognized rules of engineering, as well as the occupational
health, safety and accident prevention regulations. Neverthe-
less, dangers can arise during their use that lead to injuries to
the user or third parties or to damage to the pump or other
property.
Only use the pumps in perfect technical condition, for their in-
tended use, safely and with an awareness of the dangers and
in observation of the operating and installation instructions.
The components that are to be connected to the pumps must
be designed according to the pneumatic data of the pumps.
When connecting the pumps to the electrical power, observe
the corresponding safety rules.
Make sure that no hazardous situation, physical harm or im-
pairment of the pump can occur.
Operating Only operate and install the pump under the operating param-
parameters eters and operating conditions described in Chapters 2.4 Op-
erating conditions [} 9] and 3 Technical data [} 14].
2.3 Working in a safety conscious manner
Observe the regulations on accident prevention and safety
during all work on the pumps and during operation.
Avoid contact with the pump heads and housing parts be-
cause the pump heats up during operation.
When working on the pump, make sure that the pump is dis-
connected from mains and without power.
When connecting the pump to the electrical mains, observe
the corresponding safety rules.
Ensure that no hazards arise from gas flowing when gas con-
nections are open, from the effects of noise or from hot, corro-
sive, dangerous and environmentally hazardous gases.
Make sure that an EMC-compliant installation of the pump is
ensured at all times to prevent the occurrence of dangerous
situations.
Translation of Original Operating and Installation Instruction, KNF
8
339866-336533 02/23