Installation and connection
Cooling air sup-
ply
Immediate envi-
ronment of the
hot pump parts
Installation loca-
tion
22
Fig.3: Fastening dimensions N952KTE-W
WARNING
à
During installation, make sure that no combustible or ther-
mally deformable objects are positioned in the immediate
environment of the hot pump parts (head, drive).
à
Make sure that the installation location is dry and that the
pump is protected from rain, spray water, splash water,
dripping water and other contaminants.
Translation of Original Operating and Installation Instruction, KNF
Diaphragm pump N952KTE-W N952KT.29E-W
Danger of burning on hot surfaces
Hot surfaces could occur if the pump
overheats.
à
When installing the pump, make
sure that sufficient cooling air in-
feed and discharge is ensured.
339866-336533 02/23