Simy My-MOB Guia Del Usuario página 20

Installing the beacon in your life jacket
The My-MOB beacon can be attached to the life jacked in two di erent ways:
• using the "mouthpiece" clip
• using the "strap" clip
Attaching the beacon using the "mouthpiece" clip
The mouthpiece is pre-assembled in the factory and clipped to the beacon prior to packaging. Depending
on where the mouthpiece is on your life jacket, you can attach the mouthpiece on the left or right.
Once the mouthpiece clip has been attached, check that the 4 attachment points are a xed to the
beacon. Insert the beacon' s mouthpiece clip around your jacket' s mouthpiece. The beacon is now
attached.
If you want to switch the clip to the other side, use a small tool such as a screwdriver tip to leverage it
delicately. This will unlock the clip's 4 attachment points from the beacon. Never try doing it by hand, for
fear of breaking the mouthpiece.
N
Battery expiry date:
June XXXX
-20/+55°C (-5/+131°F)
Compass safe
distance: 0.5m
Will not float
User ID MMSI:
XXXXXXXXXXXXXXX
Can be mounted on the left or right
Battery expiry date
Unique beacon identification
number (MMSI)
19