Simy My-MOB Guia Del Usuario página 27

If the user wishes to test their beacon's DSC receiver, they can send an acknowledgement from their
VHF (to do so, please refer to the VHF's user guide). If acknowledgement is received by the beacon, the
green LED will flash twice and the test will end with a coloured flash corresponding to battery status
(see Short test).
If the user does not wish to test the DSC receiver, they can press on the T button for 3 seconds to stop
it. The red LED will flash 5 times, indicating the end of the self-test. In this last case, the beacon will not
show the battery's status. A short self-test can be run to test the battery's power level.
The beacon can be switched o at any time during the full test by holding down the T button until the
red LED flashes 5 times, then release the button and the beacon will switch o .
Caution: The full test must not be run more than once a month, so as not to deteriorate battery
life.
26
E