Publicidad
Idiomas disponibles
Idiomas disponibles
ERROR CODES
If an error code appears on the display (ie. E0 1, E03, etc.), review following
procedure and see below for error code descriptions. If error codes persist, call
Customer Service.
• Ensure you are using the included power cord.
• Ensure outlet is rated for 110-120V.
• Ensure no moving parts are stuck. If stuck, carefully release the parts or remove
any blockages.
• Ensure there is sufficient lubrication between running belt and board. If not,
see 'LUBRICATION' section.
ERROR CODE
E01
E03
E05
E07
E08
REPLACING REMOTE BATTERIES
Remove battery cover and replace old battery with a new CR2032 battery
according to the polarity indicated on the backside of the battery cover.
See "Use Instructions" (Page 6) for additional setup instructions.
10
MAINTENANCE
DESCRIPTION
Connection Error
Sudden Malfunction
Overload Protection
Security Lock Off
Hardware Over-
Current Protection
SOLUTION
Check if connection is loose or
damaged.
Check if line is plugged in. Restart
treadmill.
Check for overload or if any moving
parts are stuck, if so, carefully release
them. Check if there is insufficient
lubrication between running belt and
board, if so, apply lubrication oil (see
Cleaning & Maintenance).
Ensure security lock is placed on
handlebars. Check safety lock condition
and ensure magnetic ring is not broken.
Check for overload. Restart treadmill.
Publicidad
