Publicidad
Idiomas disponibles
Idiomas disponibles
Risk of bodily injury, electric shock, or equipment damage.
• This equipment must not be used by children or persons with reduced physical, sensory or mental
abilities, or lacking in experience and expertise, unless supervised or instructed. Children may not
use the equipment, nor may they play with the unit or in the immediate vicinity.
• Equipment can start automatically. Always unplug the pump power cord and disconnect the electri-
cal power before servicing the pump or control.
• Operation of this equipment requires detailed installation and operation instructions provided in this
manual for use with this product. Read entire manual before starting installation and operation. End
User should receive and retain manual for future use.
• Do not wear loose clothing, jewelry, or anything that may be caught in the rotating parts. Tie up long
hair and remove jewelry.
• Wear safety glasses while installing or performing maintenance on the pump.
• Keep safety labels clean and in good condition.
• Keep work area clean, well-lit, and uncluttered.
• This pump has been evaluated for use with water only.
• An acceptable motor control device shall be provided at the time of installation.
Risk of damage to pump or other equipment.
• Periodically inspect pump and system components. Regularly check piping for weakness or wear,
making certain that all connections are secure.
• The motor on this pump is guaranteed by the manufacturer. In event of failure, it must be returned to
an authorized product reseller for review and disposition. Product warranty is void if product is disas-
sembled or reviewed by any other party.
• Install the pump in a properly developed well. Undeveloped well water often contains abrasives that
can damage the pump.
• Check that the well is deep enough to allow the pump to be set at least 5 ft from the bottom.
• Do not set pump below the casing perforations or well screen unless there is an adequate flow of
water over the motor for cooling purposes is ensured.
• Determine the correct pump setting from the driller's record, taking into account the static water
level and the draw-down at the proposed pumping rate.
• Schedule and perform routine maintenance as required. Refer to
SAFETY INSTRUCTIONS
Specifications
"Maintenance" on page
7.
3
Publicidad
