Publicidad
Idiomas disponibles
Idiomas disponibles
Hit out double notched taper pin T and pull out valve trigger U. Undo locking screw V and
take out pressure spring W and locking slide X (see fig. 9).
Re-assembly of handle
The re-assembly is done in reverse order.
Disassembly of the gearbox and the band saw head
Prepare as follows: Undo counter sunk screws Y and remove drive pulleys D (see fig. 10).
Disassembly of the gearbox
Take out the planet carrier with all gearbox stages Z. Pull out the grooved ball bearing a.
Remove snap rings b and pull off the bearing ring c with the second grooved ball bearing a.
(see fig. 11).
57
Publicidad
