Emos P5603R Manual De Instrucciones página 6

3 – °C/°F temperature unit
4 – heating or cooling operating mode
Procedure for Removing the Front of the Thermostat (See Fig. 1)
INSTALLATION
Attention:
Before changing the thermostat, disconnect the heating/air-conditioning
system from the mains power in your flat. This will prevent potential injury
by electric current.
Read the thermostat manual carefully before using the device for the
first time.
Turn off power supply before installing the thermostat!
Follow applicable standards during installation.
Placement of the Thermostat
The placement of the thermostat significantly affects its functioning. Choose
a location where family members spend most of their time,
preferably on the inside wall where air circulates freely, with no direct
sunlight. Do not place the thermostat
in the vicinity of heat sources (such as TV sets, radiators, fridges), or close
to a door (due to frequent shocks or vibrations). If you do not follow these
recommendations, the thermostat will not maintain room temperature
correctly.
Installation of the Thermostat
The rear cover of the thermostat has 6 pre-made openings for mounting
onto a wall.
Remove the rear cover and use the enclosed screws and wall plugs to
mount the thermostat to a wall.
The connection terminals are protected by a plastic cover, see Fig. 3.
Connect the wires leading out of the junction box to the marked terminals
on the thermostat in accordance with the wiring diagram.
6