Publicidad
19. Display
20. "ZERO" button - resetting/launching the settings menu
21. "UNIT" button - change of measurement unit
22. "TARE" button - tare function
23. "HOLD" button - retaining the weight reading
24. Power supply cord (the socket is on the right side at the top)
25. Cable connecting the display to the weighing platform
26. D-SUB socket
27. "I/O" switch (I - on; O - off)
28. Pressure screw that adjusts the angle of the display
29. Installation board for computer
30. Power supply
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Keep the unit away from any hot surfaces. Always operate the unit on
a level, stable, clean, fireproof and dry surface and out of the reach of children and
persons of impaired mental, sensory and intellectual functions. Maintain a
minimum clearance of 10 cm from any wall of the unit. Place the unit in such a way
that the mains plug can be reached at any time. Ensure that the power supply to the
unit corresponds to that specified on the identification plate!
HANGING THE DISPLAY (model SBS-PS-1800):
Publicidad
