Descargar Imprimir esta página

EHEIM thermocontrol 25 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
USA
IMPORTANT SAFETY
INSTRUCTIONS
WARNING- To guard against injury, basic safety precautions should
be observed, including the following.
‧ FOR HOUSEHOLD USE ONLY
‧ WARNING! RISK OF ELECTRIC SHOCK!
‧ DO NOT RUN DRY!
READ AND FOLLOW
ALL SAFETY INSTRUC-
TIONS.
‧ DANGER
special care should be taken since water is employed in
the use of aquarium equipment. For each of the following
situations, do not attempt repairs by yourself. Return the
appliance to an authorized service facility for service or
discard the appliance.
‧ If the appliance shows any sign of abnormal water leak-
age, immediately unplug it from the power source.
‧ Carefully examine the appliance after installation. It
should not be plugged in if there is water on parts not
intended to be wet.
‧ Unplug the appliance from the socket outlet to disable
any remote command.
‧ Do not operate any appliance if it has a damaged cord
or plug, or if it is malfunctioning or has been dropped or
damaged in any manner.
‧ To avoid the possibility of the appliance plug or recepta-
cle getting wet, position aquarium stand and tank to one
side of a wall-mounted receptacle to prevent water from
dripping onto the receptacle or plug. A "drip loop", shown
in the figure, should be arranged by the user for each
cord connecting an aquarium appliance to a receptacle.
The "drip loop" is that part of the cord below the level
of the receptacle, or the connector if an extension cord
is used, to prevent water traveling along the cord and
coming in contact with the receptacle. If the plug or
socket does get wet, DON'T unplug the cord. Disconnect
the fuse or circuit breaker that supplies power to the
appliance. Then unplug and examine for presence of
water in the receptacle.
POWER
SUPPLY
CORD
‧ Close supervision is necessary when any appliance is
used by or near children.
‧ To avoid injury, do not touch moving parts or hot parts
such as heaters, reflectors, lamp bulbs, and the like.
– To avoid possible electric shock,
DRIP LOOP
9

Publicidad

loading