VELTIUM LITE Zero Guía De Usuario página 22

USER GUIDE - VELTIUM LITE
7. MANAGING THE CHARGER FROM THE VELTIUM APP
Once you have selected a charger in the App Chargers area you can manage all related aspects
from the different screens appearing below:
You can also see the charger status on a strip in the same colour as the LIGHT INDICATOR on the
device. Consult the CHARGER STATUS AND COLOUR CODES of this USER GUIDE to see what each
status means. If the status shown by the App is OFFLINE, check the COMMUNICATIONS WITH THE
CHARGER section of this USER GUIDE to identify and solve the issue.
SETTINGS
Remember that for security reasons, the charger settings can only be changed if you are
connected to the device by Bluetooth, never remotely.
Charger name
Firmware update
The name you have assigned to the charger will always
appear at the top of the screen.
At the bottom you'll see different icons that you can use to
move between the different charger screens.
Assign the name of your choice to your charger for easy identification and press
Confirm.
Here you can check for pending updates. If there are any, press the
button. You can see how the process is progressing on the screen. It is VERY
IMPORTANT that you stay within the charger's Bluetooth range (8-10 metres)
until the App tells you the process is complete. The charger will automatically
restart once the process has finished, you don't have to restart it manually.
Consult the CHARGER STATUS AND COLOUR CODES section of this USER
GUIDE for more information on this process.
Only in LITE Uno and LITE Kubo chargers.
You can also activate the
update firmware when a version later than the one you have installed becomes
available. This process will only run when the charger is in AVAILABLE mode,
never while the vehicle is connected or while charging.
Automatic updates feature enabling the charger to
EN
Update
22