Vitrifrigo MACS Serie Manual página 82

Temperature setting
To set temperature at the desired value, push buttons
In the display is showed the setting temperature.
Setting the operating mode
You can set one of the four operating modes:
Cooling mode
Heating mode
Auto mode
Ventilation
For changes the mode of MACS press the button
14. VENTILATION CONTROLS
Ventilation mode setting
Is possible define two different ventilation mode:
Manual The level is defined in manual setting.
Automatic The setting of the ventilation is automatic. The ventilation increases and decrease in
function of difference of environmental temperature and setting temperature.
The setting speed is showed to right and near to the ventilation symbol.
In the default, the speed level is the maximum value in manual mode. It is possible to change the ventilation
level using the button
value, the ventilation pass to the minimum value to the maximum value. At the maximum value if you press
The MACS makes cold air
The MACS makes heating air
The MACS makes cooling or heating air in bases of the selecting
temperature
The MACS makes only air ventilation
. To the default speed value using the button
(decreasing) or
.
81
(increasing).
to pass at the successive speed