Flex FX4221 Manual Del Operador página 11

INSTALLING AND REMOVING THE BASE
(FIG. 3 AND 4)
To remove the base
1. Detach the battery pack.
2. Place the tool upside down.
3. Open the lock lever on the base unit (Fig. 3).
4. Depress both quick release tabs on the motor
unit with one hand. With the other hand, pull
the base unit from the motor unit (Fig. 4).
To install the base
1. Align the vertical slot on the motor unit with
the pegs on the inside of the base unit as
shown in Fig. 4. It is recommended to make
the spindle lock face the dust outlet for easy
operation on the spindle lock.
2. Lower the base unit onto the motor unit. Push
the base unit down until you hear a "click",
which means the base unit is mounted onto
the motor unit properly.
3. Close the lock lever on the base unit.
Fig. 3
Base Lock Lever
Fig. 4
Slot
-11-
Base
Pegs
Motor
Quick
Release
Tab (x2)