Keysight U1190A Serie Guia Del Usuario página 38

1 Introduction
Cleaning Your Clamp Meter
To avoid electrical shock or damage to the clamp meter, ensure that the
WARNING
insides of the casing stay dry at all times.
Dirt or moisture in the terminals can distort readings. Follow the steps below to
clean your clamp meter.
1 Turn the clamp meter off, and remove the test leads.
2 Turn the clamp meter over, and shake out any dirt that may have accumulated
Clean the case with a soft, lint-free, slightly dampened cloth. Do not use
detergent, volatile liquids, or chemical solvents.
38
in the terminals.
Keysight U1190A Series User's Guide