Publicidad
Idiomas disponibles
Idiomas disponibles
– Place the top of the clamp meter close to a conductor when sensing for AC
NOTE
– The low sensitivity setting can be used on flush mounted wall sockets or
– The high sensitivity setting allows for AC voltage sensing on other styles of
Press
sensitivity) or Lo.SE (low sensitivity).
Figure 3-1
Figure 3-2
Keysight U1190A Series User's Guide
voltages (as low as 24 V in the Hi.SE setting).
outlets and various power strips or cords.
recessed power connectors or sockets where the actual AC voltage is
recessed within the connector itself.
to toggle the Vsense detector's sensitivity between Hi.SE (high
Vsense (high sensitivity) display
Vsense (low sensitivity) display
Clamp Meter Features
3
69
Publicidad
