Cameo F2 FC IP Manual De Usuario página 15

CCT STANDALONE MODE (Correlated Colour Temperature)
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select the CCT mode (note the
selection arrow on the left) and confirm by pressing the left encoder (ENTER). You can now set the
brightness (DIM), colour temperature (CCT) and hue (Tint) using the three rotary-push encoders
(see illustration).
currently activated operating mode
Turn encoder =
Set brightness (DIM)
Press encoder =
Selection of the operating mode
(Mode)
STANDALONE OPERATING MODE HSI (Hue – Saturation – Intensity)
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select the HSI operating mode
(note the selection arrow on the left) and confirm by pressing the left encoder (ENTER). You can
now set the brightness (DIM), hue (HUE) and colour saturation (SAT) using the three rotary-push
encoders (see illustration).
currently activated operating mode
Turn encoder =
Set brightness (DIM)
Press encoder =
Selection of the operating mode
(Mode)
Turn encoder =
Set colour temperature (CCT)
Turn encoder = set
colour tone (HUE)
Fan mode
Turn encoder =
Set colour tone (Tint)
Press encoder =
Open main menu (Menu)
Fan mode
Turn encoder =
Set colour saturation (SAT)
Press encoder =
Open main menu (Menu)
15