Cameo F2 FC IP Manual De Usuario página 19

EDIT STANDALONE OPERATING MODE PLAY LOOP (Edit Loop)
Starting from the main display, press the rotary-push encoder to enter the main menu. Turn the
left encoder (SELECT) to select the menu item Edit Loop (note the selection arrow on the left) and
confirm by pressing the left encoder (ENTER). Now you can select one of the 8 colour sequences
by turning the left encoder and confirm the selection by pressing the left encoder (ENTER).
Now give the colour sequence an individual, up to 12-digit name (Edit Loop Name) by turning the
left encoder to select a letter, the underscore or a number for the first digit of the preset name and
confirm by pressing the left encoder. This is followed by the input for the second digit and so on.
When the preset name is complete, press the middle encoder (Save&Next) to move to the next
editing step. If you press Save&Next before selecting a letter, an underscore, or a number for the
first digit, the previous preset name is retained and you move immediately to the next editing step.
Select step 1 of the 8-step sequence (Step1 - Step8) by turning the left encoder, then set the
colour of the step (Step1, note the selection arrow). Now select one of the colours set in the
standalone mode User Color by turning the middle encoder and confirm the selection for step
1 by pressing the middle encoder. The selected colour of the respective step is visually indicated
by a box with a light background below the colour numbers 1 to 8. Proceed in the same way to
set the colours of steps 2 to 8. Complete the process and save the sequence by pressing the left
encoder (ENTER).
19