Advanced Bionics Naida CI M90 Guía De Usuario página 27

Managing Bluetooth Phone Calls with the Naída CI M90
When the sound processor is directly connected with a Bluetooth-
enabled phone, you will be able to hear the caller's voice directly
through the sound processor. The sound processor picks up your voice
through the sound processor microphones.
When making a phone call, you will hear a dialing tone through the
sound processor. The sound processor microphones pick up your voice.
When receiving a call, a call notification will be heard through the sound
processor. You can accept the call with a short press on the upper or
lower part of the multifunction button on the sound processor or directly
on the phone.
You can reject or end a call with a long press on the upper or lower part
of the multifunction button on the sound processor or directly through
the phone.
Streaming Audio via Bluetooth with the Naída CI M90
After successful pairing of your processor(s) to your Bluetooth-enabled
device, ensure that your device is not muted, and volume is not set to
minimum. Then, simply start the audio on the Bluetooth-enabled device
and the sound processor will start streaming the audio. Environmental
balance and access to surrounding sounds can be managed using the
multifunction button, the AB Remote mobile application, or the Phonak
RemoteControl.
Pairing the Naída CI M90 to Phonak Accessories
Your Naída CI M90 can be paired to the following Phonak accessories:
• Phonak RemoteControl
• Phonak TV Connector
• Phonak PartnerMic
• Phonak Roger transmitters
• Phonak Naída Link M hearing instrument
Please refer to the accessory user guide for initial setup and pairing
instructions.
Switching between Multiple Audio Sources with the Naída CI M90
A phone call from a Bluetooth-enabled device has highest priority and
will pause other audio streaming from a connected device. In order to
switch audio streaming source, simply pause the audio from the current
source and start streaming from another source.
25