Advanced Bionics Naida CI M90 Guía De Usuario página 29

Setting up the charger
To use the M Battery Charger with a wall outlet for charging:
Place the M Battery Charger on a flat surface.
Connect the micro USB end of the power supply cable into the charger.
Connect the power supply cable to the USB wall adapter.
Plug the wall adapter into the wall outlet.
To use the M Battery Charger with a USB port for charging:
Place the M Battery Charger on a flat surface.
Connect the micro USB end of the power supply cable into the M
Battery Charger.
Insert the USB jack into a USB port (on a computer, in a car, etc.).
Understanding M Battery Charger LED indicators
The M Battery Charger has different indicator lights that are located at
the base of each charging port, as well as where the power cable enters
the charger. If the light near the power jack is lit and green in color, it
means the charger is connected to a power source and ready to charge
the M Batteries. If the light near the power jack is lit and red in color, this
indicates a fault condition. *
The LEDs located at the base of each charging port have 3 color
options:
• Blue: M Battery is charging�
• Green: M Battery is fully charged�
•
Red: Fault condition�*
*Try to reinsert the power cable or M Battery. If the red LED illuminates
again, contact your cochlear implant professional.
The charger has an automatic dimmer. The brightness of the LEDs may
vary depending on the brightness of the room in which the charger is
placed.
Inserting the M Batteries into the charger
Locate the slide tracks on the charger. Position the M Battery so that
the battery contact is facing down toward the base of the charger and
aligned with the tracks on the charger.
27