Starting The Machine; C) Using The Functions; Frying Function - Brandt TISLIM Manual De Instrucciones

 Use the base of your finger and not the tip as shown in the pictures below.

Push the slider with your finger to increase or decrease the power,
 You will hear a beep each time an action is recorded.
 The control panel must always be clean, dry and not covered by an object or a fabric.
Even a fine film of water may create malfunctions.
b) Starting the Machine
After having turned the machine on the audible alarm sounds and the screen displays "L" (cold)
or "H" (hot), indicating that the temperature of the induction plate is less than or higher than
60°C. Then press the Start/Stop key (7). The screen displays "----" meaning that the machine
is on standby and ready to be programmed. You can now use your induction plate.
Just press the + or - keys on your machine to select the desired power or use the slider directly
by sliding your finger from left to right or vice versa.
Never place an empty pan on the machine when it is in operation.
Note:
Once the machine is ready to be used, and if you don't press any other key during the next 30
seconds, it will turn off automatically after 60 seconds for safety reasons. The screen will show
"L" meaning that the machine's temperature is less than 60°C and is turned off.
In the same way if you place an incompatible pan on the plate the screen will show "E1" and a
beep will be heard. The machine will turn off automatically in the next 30 seconds.
c) Using the Functions
 Simmering Function
To use this function press the Simmering key (2). An indicator light comes on above the key.
The heating power is adjusted to 2 by default. Pressing the +/- keys deactivates the mode.


Frying Function

To use this function press the Frying key (4). An indicator light comes on above the key. The
heating power is adjusted to 6 by default. Pressing the +/- keys deactivates the mode.
23