Stopping The Machine; Looking After Your Machine And Dealing With Faults; Cleaning The Machine - Brandt TISLIM Manual De Instrucciones

d) Stopping the Machine
After use the electric plate will be hot, the audible alarm sounds and the "H" indicator flashes
on the screen. To turn of the machine press the Start/Stop key (7) and then unplug it.
For information, you can refer to the following table to find the heating level relating to each
number on your control panel.
Level 1
Wattage (W) 120

4) LOOKING AFTER YOUR MACHINE AND DEALING WITH FAULTS

a)

Cleaning the Machine

Ensure the machine is off and unplugged before cleaning.
Carry out cleaning when the ceramic plate has cooled down.
About the vitroceramic plate and the control panel
 Lightly soiled: clean with a soft, damp cloth
 Soiled with fat: clean with a soft, damp cloth with a little toothpaste or neutral detergent
until the residues are removed.
 Do not use an abrasive, flammable, acid or alkaline cleaning liquid
Note: When cleaning never clean with surface of the hob with a stiff brush.
About the air inlet and the air vent
After a long period of use dust and other dirt may accumulate in the air inlet or the air vent.
The body of the induction cooker should be cleaned carefully with a clean, dry cloth. The dust
around the air inlet and the air vent must be cleaned with a supple brush or a cleaner.
Note: Do not immerse the induction cooker in water and do not clean it with a steam
cleaner.
2 3 4
300 500 800
5 6
1000 1200 1400
25
7 8 9
1600 1800
10
2000