Changing The Radio Channel - Auriol AFT 77 A1 Instrucciones De Uso

Changing the radio channel

Changing the radio channel on the
outdoor sensor
You can select between 3 radio channels
Channel 1 is preset
♦ Open the battery compartment i on
the rear of the appliance by removing the
battery compartment cover o
♦ Select a radio channel by pushing the
channel selector u to CH1, CH2 or CH3
♦ Press and hold the
reception signal
temperature panel 4
Press the TX button z to manually initiate
♦
the outdoor sensor radio signal If recep­
tion is successful, the temperature on the
outdoor temperature panel 4 will now be
displayed on the new radio channel
♦ Close the battery compartment i again
Changing the radio channel display
on the temperature station
If the temperature station is receiving the out­
door sensor radio signal, it will automatically
display the corresponding channel
However, you can also manually set the dis­
play of various radio channels
♦ Press the
switch between the displays CH1 (display
channel 1), CH2 (display channel 2), CH3
(display channel 3) and
channels alternately in a loop)
│ GB │ MT
■ 86
button 0 until the
flashes on the outdoor
button 0 repeatedly to
(display all
AFT 77 A1