Technical Specification; Intended Use; Improper Use - EGAmaster 79902 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

NOTICE – Gives recommendations and important hints for handling the product

IMPORTANT – Indicates application advice and other particularly useful information.

This symbol

has the

REMARK:

following

meaning:

In each case the symbol used does not replace the safety text. The text must always be read fully. In

some cases other symbols will be used with the signal words.

Operating pressure

For screws up to

Max. Torque (hard thread)

Air connection

Air consumption in average

Noise pressure level L

Noise power level L

ATEX Classification

Remark: Measurement acc. to DIN EN ISO 15744

(1)

Remark: Measurement acc. to DIN EN ISO 28927-2

(2)

The performance specifications are guide values only, they depend basically on the application, the working

pressure and the accessories used.

The manufacturer machines are designed for industrial use only.

Only trained, skilled personnel are allowed to operate the machine. Impact wrenches are designed for the

tightening and loosening of screw joints in a range of performance defined by the manufacturer.

They have to be used in combination with appropriate:

•

Power socket wrenches,

•

extensions,

•

joints,

•

adapters.

It can be applied for:

•

Construction, pipeline construction, chemical industry/refineries and offshore, as well as for underwater use.

Any use deviating from the intended use as described is considered to be improper use.

•

Working without personal protection equipment.

•

Using the machine in an inadmissable area.

•

Using the machine for drilling, mixing or grinding.