Publicidad
Idiomas disponibles
Idiomas disponibles
8. Install the handlebar balancer
and balancer screw. Tighten the
balancer screw to the specified
torque.
Screw : 5.5N . m
(0.55 kgf-m, 4.0 lbf-ft)
9. Adjust the throttle cable play
as following steps.
1) Loosen the lock-nut.
2) Turn the adjuster nut so
that the throttle grip has
2.0 - 4.0 mm play.
3) Tighten the lock-nut.
4) Install the boot.
WARNING
Check that there isn't any
catch during opening and
closing the throttle.
Handlebar balancer
Boot
⑤
GENUINE SUZUKI ACCESSORIES
7
/20
Balancer screw
Adjuster
Lock-nut
2.0 〜 4.0 mm
Publicidad
