MSW Motor Technics MSW-ES-1010 Manual De Instrucciones página 53

b) The gun tip should always be perpendicular to the surface being
sprayed at a distance of about 25-30 cm, otherwise the paint
distribution will be uneven at both ends of the spray.
c) Start spraying along the surface with and only after you have
started the hand stroke do you press the trigger; likewise, when
finishing, first release the trigger and continue the hand stroke
for a while. Each sprayed section should overlap ca. 30% with the
previous one. Maintain an even distance from the surface to be
painted as described in steps a) and b) above - see picture below:
1 - starting the hand stroke
•