Publicidad
Idiomas disponibles
Idiomas disponibles
1. Top Nut
2. Top seal
3. Piston Seal Kit
4. Retaining flange
5. Sealing ring
6. Steel balls
7. Valve body
8. Locking ring
j)
Lubricate the new upper seal with the supplied "TSL" oil and manually
place it with the seal down into the upper housing bore.
k) Apply a small amount of threadlock lubricant to the threads of the
upper nut. Place the top nut on top of the housing and tighten it. This
will push the top seal into position.
l)
Place the unit upside down. Lubricate the lower seal and its set like
the upper seal and place it at the bottom of the housing. Set the
piston with the seal - press down until it settles.
Publicidad
