Evenflo PIVOT XPAND Manual De Instrucciones página 24

Using Your Stroller as a Double Stroller
3
4
CLICK!
5
Hub
6
There are 2 seating mount
CLICK! positions:
• Single seat mount position
• Upper seat mount position
button
Once the lower seat mounts are set
up into position (pg. 23) press the
button on single seat mounts and
slide them up into the upper mount
position to allow for room to place a
car seat or toddler seat in the lower
mount position.
Double check mounts are locked into
position by pushing them up or down
on the slide track before placing
either the car seat or toddler seat
onto the stroller.
To attach toddler seat, slide seat onto
the lower seat mounts until they click
into place. LIFT UP on seat to make
sure it is securely attached to the
mounts.
NOTE: You will need to attach either
the car seat or toddler seat onto the
lower seat mount before attaching
your other accessory onto the upper
mount position.
CLICK!
To attach infant car seat to the upper
mount position, line up hub of handle
with the seat mounts. Insert the car
seat into the mounts until they click
into place on both sides of the frame.
LIFT UP on the car seat to make sure
that it is securely attached.
Your double stroller mode is now
ready to use.
24