Descargar Imprimir esta página

SDMO SD 6000 TE-2 Manual De Uso Y De Mantenimiento página 17

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
1. Préambule
2. Description générale
3. Préparation avant mise en service
4. Utilisation du groupe
5. Protections (si équipé, voir tableau de caractéristiques)
6. Programme d'entretien
1. Preface
1.1. Recommendations
Thank you for buying one of our generating sets. We recommend that you read this manual carefully and follow the safety and
maintenance advice and user instructions for your generating set very closely.
The information contained in this manual is taken from technical data available at the time of print. In the intention of permanently
improving the quality of our products, this information may be amended without warning.
1.2. Pictograms and plates on the generating sets and what they mean
Danger
Earth
2 - Warning: emission of toxic exhaust gases. Do not use in a confined or poorly ventilated area.
A = Generating set model
B = Generating set output
C = Voltage
D = Amperage
E = Current frequency
F = Power factor
1.3. Instructions and safety regulations
Do not run the generating set without having put back the protective covers and closed the access doors.
Never take the protective covers off or open the access doors if the generating set is running.
Danger
Warning: risk of electric shock
Danger, risk of burns
1
1 - Important: refer to the documentation accompanying the generating set.
3 - Stop the motor before filling with fuel.
Example of an identification plate
Contents
7. Méthode d'entretien
8. Stockage du groupe
9. Recherche de pannes mineures
10. Caractéristiques
11. Section des câbles
12. Déclaration de conformité "C.E."
2
3
Warning: the generating set is
supplied without oil. Always
check the oil level before starting
the generating set.
G = Protection rating
H = Generating set noise output
I = Generating set earth
J = Reference Standard
K = Serial number

Publicidad

loading