Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Press once again to start the pre-heating. You will hear a signal when the desired temperature is
reached. Put your dish in the microwave.
4.
Turn the knob to set the desired time. The maximum amount of time that can be set is 95
minutes.
5.
Press start to start the selected setting.
! Note: the time cannot be set until the appliance has been pre-heated. If the appliance has pre-heated
and you do not set the desired time within 5 minutes, the appliance will stop pre-heating.
Convection function without pre-heat function
1.
Press the mode button. "P100" will appear on the display. Press this button again or turn the
turning knob until "150 °C" appears on the display.
2.
The temperature can be set from 150 °C to 240 °C. Select the desired temperature and press
start.
3.
Turn the knob to set the desired time. The maximum amount of time that can be set is 95
minutes.
4.
Press start to start the selected setting.
QUICK USE
You can also use the microwave mode without going through the mode menu. This can be done in 2 ways:
1.
Press the start button. The microwave will then operate at 100% power for 30 seconds. Every
press of the knob increases the set time by 30 seconds.
2.
Turn the knob to the left. And then turn (left or right) to set the desired time. Press start to
activate the selected setting.
You can also increase the time when operating in any of the modes, except for defrost, duo setting and
automatic cooking programme.
To do so, press the start button. Every press of the knob increases the set time by 30 seconds.
TIMER
You can also use the appliance as a timer. The appliance will not heat up but simply function as a timer.
1.
Press the button twice to set the time. "00:00" will appear on the display.
2.
Turn the knob to set the desired time. The maximum amount of time that can be set is 95
minutes.
3.
Press start to start the selected timer. When the time has elapsed, the appliance will emit a
sound.
DEFROST
Defrost according to weight
1.
Press the button to set the defrost function. "d-1" will appear on the display.
www.domo-elektro.be
49
DO2334CG
Publicidad
