Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Skin contact with dust particles, etc. may cause skin irritation in sensitive
persons.
Serious injury to the lungs and respiratory tract is possible!
To avoid contact with and inhalation of dust particles, wear disposable
gloves and disposable respiratory protection, Class FFP2 or higher.
When cleaning, the release of dangerous dust particles must be avoided,
so that bystanders are not injured.
NOTE
Do not clean the product with compressed air. This may result in dust
particles getting into the ambient air.
Always ensure there is adequate lighting for maintenance tasks.
7.2.1 Changing the filter – Safety instructions
The life of the filter inserts depends on the type and amount of deposited
particles.
As the dust accumulation in the filter increases, its flow resistance
increases and the extraction capacity of the product decreases.
Even in the case of products with an automatic filter cleaning system (if
present), deposits can reduce the flow resistance.
A filter change is required.
WARNING
Health hazards caused by welding fume particles
Inhalation of welding fume particles, especially welding fume particles
from welding processes on alloyed steels, can damage your health as
they are 'respirable'. Skin contact with welding fume particles can cause
skin irritation in sensitive individuals.
To avoid contact with and inhalation of these dust particles, wear
disposable overalls, protective goggles, gloves and a suitable Class FFP2
respiratory protection filter mask in accordance with EN 149.
1502778-02
- 90 -
EN
Publicidad
