Cramer 82T20 Manual De Instrucciones página 8

EN
Problem Possible Cause
The line Lines are welded
does not ad- to themselves.
vance.
Not enough line
on the spool.
Lines are worn
and too short.
Lines are tangled
on the spool.
The line The machine is
keeps used incorrectly.
breaking.
The grass Cut tall grass at
winds ground level.
around the
trimmer
head and
motor hous-
ing.
The line The cut-off blade
does not cut becomes dull.
well.
Vibration The line is worn
increases down at one side
obviously. and not advanced
in time.
8 TECHNICAL DATA
Voltage
No load speed
Cutting head
Cutting line diame-
ter
Cutting path diam-
eter
Weight (without
battery pack)
Battery model
Charger model
Solution
Lubricate with silicone
spray.
Install more line.
Advance the cutting line.
1. Remove the lines from
the spool.
2. Wind the lines.
1. Cut with the tip of the
line, avoid stones, walls
and other hard objects.
2. Advance the cutting
line regularly to keep full
cutting width.
1. Cut tall grass from the
top down.
2. Remove no more than
20 cm in each pass to
prevent wrapping.
Sharpen the cut-off blade
with a file or replace it.
Make sure that the line on
both sides is equal. Ad-
vance the line.
82 V
-1
5000-6000 ±10% min (Grass trim-
-1
mer),5000-6000±10% min
cutter)
Bump feed / Brush cutter blade
2.4 mm
406 mm (Grass trimmer), 300 mm
(Brush cutter)
4.65 kg
82V180, 82V290P, 82V360, 82V580P
and other BAB series
82C6 and other CAB series
English
Grass trimmer
Brush cutter
IPX
XX
9 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile the
technical file:
Name:
Address:
Herewith we declare that the product
Category:
Model:
(Brush
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts, clauses of
harmonised standards have been used:
8
L
Measured sound
K
pressure level
Guaranteed sound L
power level
Vibration 6.104 m/s
m/s
Measured sound L
pressure level K= 3 dB(A)
Guaranteed sound L
power level
Vibration 6.104 m/s
m/s
IPX4
96 dB. Noise value. (Grass trimmer)
96 dB. Noise value. (Brush cutter)
GLOBGRO AB
Globe Group Europe
Riggaregatan 53 211 13 Malmö, Sweden
Micael Johansson
Riggaregatan 53 211 13 Malmö, Sweden
String trimmer / Brush cutter
82T20 (STB414)
See product rating label
See product rating label
=86.1 dB(A),
PA
= 3 dB(A)
pA
= 96 dB(A)
WA.d
2
, k=1.5
2
=86.4dB(A),
PA
=96 dB(A)
WA.d
2
, k=1.5
2