AC ADAPTER ACCESSORY (NOT INCLUDED)
NOTE: AC adapter not included; out DC 5.0V; Monitor jack size: hole 5.5mm
center pin 2.0mm.
When using an AC adapter, please make sure the monitor turn off or no batteries.
Put the connector plug of the adapter into the socket , Then plug the adapter to AC
outlet. When disconnect the AC Adapter:
•
Remove the AC Adapter from the electrical outlet;
•
Remove the AC Adapter plug from the monitor socket.
•
Do not plug or unplug the power cord into the electrical outlet with wet
hands.
•
Do not overload power outlets. Plug the device into the appropriate voltage
outlet.
•
If the AC adapter is abnormal, please change the adapter.
•
Do not pull out the adapter when you are using the monitor.
•
Do not use any other type of AC adapter as it may harm the monitor.
•
Do not position the monitor so that it is difficult to operate the disconnection
device.
12 • ENGLISH