Zanussi ZDLN6531 Manual De Instrucciones página 10

Information for test institutes
To receive the necessary information for conducting
performance tests (e.g. according to: EN60436 ),
send an email to:
info.test@dishwasher-production.com
In your request, include the product number code
(PNC) from the rating plate.
BASIC SETTINGS
You can configure the appliance by changing basic
settings according to your needs.
Number Settings
1 Water hardness
2 Rinse aid empty
notification
3 End sound
4 Auto door open
5 Key tones
6 Latest pro-
gramme selec-
tion
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting mode.
Instructions on how to configure the appliance are
provided further in this chapter.
When the appliance is in setting mode, the display
shows a digit and a letter. For each setting, a
dedicated letter is displayed. The dedicated letters
are indicated in the table.
The order of the basic settings presented in the
table is also the order of the settings in setting
mode.
10
For any other questions regarding your dishwasher,
refer to the service book provided with your
appliance.
Values
1L - 10L Adjust the level of the water softener according
to the water hardness in your area.
Factory setting: 5L.
1d (on) Activate or deactivate the rinse aid indicator.
0d (off) Factory setting: 1d.
1b (on) Activate or deactivate the acoustic signal for the
0b (off) end of a programme.
Factory setting: 0b.
1o (on) Activate or deactivate the AirDry.
0o (off) Factory setting: 1o.
1F (on) Activate or deactivate the sound of the buttons
0F (off) when pressed.
Factory setting: 1F.
1H (on) Enable or disable the automatic selection of the
0H (off) most recently used programme and options.
Factory setting: 0H.
SETTING MODE
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode while
the programme is running.
To enter setting mode, press and hold
simultaneously 30 min and ECO for about 3
seconds.
Description
• The lights related to 60 min, 90 min and
160 min are on.
• The display shows the current value of the
first available setting.
1)