Publicidad
Adjusting the projector's elevator
Lengthening or shortening the length
of the elevator feet shifts the projection
position and the projection angle.
Turn the elevator feet each to adjust
their length.
5°
5°
WARNING ►Do not lengthen the elevator feet exceeding 30 mm. The foot
lengthened exceeding the limit may come off and drop the projector down, and
result in an injury or damaging the projector.
CAUTION ►Do not place the projector with an inclination exceeding
5 degrees. The projector leaned exceeding the limit could cause malfunction
and shorten the life of the projector.
Adjusting the lens position
Shifting the lens position shifts the projection
position.
After pressing the LENS SHIFT button on the
control panel or the remote control, use the
cursor buttons to shift the lens position.
CAUTION ►Do not put your fi ngers or any other
things around the lens. The moving lens could catch
them in the space around the lens and result in an injury.
NOTE • The projector may ignore operation by buttons while moving the lens.
• Generally, better image quality is achieved when the lens is set to the center.
LWU720i/LHD720i/LWU620i
Setup Guide
max. 30mm
14
LENS SHIFT button
LENS SHIFT
button
020-001337-01 Rev. 1 (10-2017)
Publicidad
