VONROC PM508DC Traducción Del Manual Original página 8

EN
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use an
extension cable reel, always fully unroll the
cable.
2. MACHINE INFORMATION
Intended use
This machine is intended for polishing and brushing
metal and coated surfaces.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No. Batteries included Chargers included
PM508DC -
S_PM508DC CD801AA
S2_PM508DC 2 x CD801AA
S3_PM508DC CD803AA
MACHINE INFORMATION
Voltage
No-load speed
Disc diameter
Weight
Sound pressure level LPA
Sound power level LWA
Vibration
Handle with switch button ah
Handle without switch button ah 21.336m/s² K=1.5m/s²
8
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
-
Charging time 2Ah battery
CD802AA
Charging time 4Ah battery
CD802AA
Recommended batteries
CD802AA
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
20V
teries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
3000/min
CD803AA 20V, 4Ah Lithium-Ion
240 mm
2.5 kg
The following charger of the can be used to charge
these batteries.
77.5dB(A), K=3dB(A)
CD802AA Quick charger
88.5dB(A), K=3dB(A)
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
31.889m/s² K=1.5m/s²
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD803AA
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
CD802AA
220-240V, 50Hz 0.4A
21V 2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
WWW.VONROC.COM