VONROC PM508DC Traducción Del Manual Original página 9

• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work pat-
terns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2 - 3
1. On/off button
2. Rotatable handles
3. Pad
4. Textile polishing bonnet
5. Synthetic polishing bonnet
6. Battery
7. Battery unlock button
8. Battery LED indicators button
9. Battery LED indicators
10. Charger
11. Charger LED indicators
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first
use.
Inserting the battery into the machine (Fig. B)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
1. Insert the battery (6) into the base of the machi-
ne as shown in Fig. B.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the machine (Fig. B)
1. Push the battery unlock button (7).
2. Pull the battery out of the machine like shown
in Fig. B.
WWW.VONROC.COM
Checking the battery charging status (Fig. C)
• To check the battery charge status, push the
button (8) on battery shortly.
• The battery has 3 lights indicating the charge
level, the more lights that burn, the more char-
ge the battery has left.
• When the lights are not burning it means the
battery is empty and must be charged immedia-
tely.
Charging the battery with the charger (Fig. C)
1. Take the battery (6) from the machine.
2. Turn the battery (6) to upside down position and
slide it onto the charger (10) as shown in Fig. C.
3. Push the battery until it is fully pushed into the
slot.
4. Plug the charger plug into an electrical outlet
and wait for a while. The LED indicators (11) on
the charger (10) will lighten up and show the
charger status.
The charger has 2 LED indicators (11) which indi­
cate the status of the charging process:
Red LED Green LED Charger status
Status status
Off Off No power
Off On Standby mode:
- No battery is inserted or,
- Battery inserted but char-
On Off Battery charging in progress
• Fully charging the 2Ah battery may take up to
60 minutes.
• Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the char-
ger plug from the outlet and remove the battery
from the charger.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
ging has finished
9
EN