Fiem Cip Cip 28 Manual De Uso página 11

INSTRUCTIONS CIP CIP 28 / CIP CIP 40
GB
BEFORE USE
Before using the incubator, it is recommended to study the Instruction Manual, especially the technical
and safety data aspects, in order to gain an understanding of the components and the potential
operation of the machine.
MACHINE UNPACKING
Take the incubator out of its cardboard box and remove the internal components which are secured
by the adhesive tape and check that they are intact.
Check the following components are included:
• 1 instruction Book
• 1 thermometer °F
• 1 egg turning grid + metal inserts
• 1 humidity basin ref. (for CIP CIP 28)
• 1 humidity basin with two tanks (for CIP CIP 40)
• 1 safety fuse 2A.
The incubator is supplied with a single phase electric cable (approx. 1,5 mt.) with a plug for the electric connection
220/230V, 50/60Hz. On the back of the machine, the data plate gives full details regarding the voltage, power requi-
rements, registration number and production date.
IMPORTANT: Remember to check thermometer is working correctly, examining that there are no breaks in the line
of alcohol.
WARNING: This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without supervision. If the in order to avoid
a hazard.
INFORMATION TO THE USERS: Under Legislative Decree 25 September 2007, no.185 and art. 13, Legislative
Decree 25 July 2005, no.151/95/EC, 2002/96/EC and 2003/108/EC, regarding the reduction of use of hazardous
substances in electrical and electronic equipment as well as waste disposal". The barred waste container symbol
on the equipment means that the product, at the end of its service life, must be disposed of separately from the
other types of waste. The user must therefore convey the equipment, at the end of its service life, to the appropriate
separate collection centres for electronic/electro technical waste products or return it to the dealer when purchasing
a new equivalent equipment. The appropriate separate collection and the following sending of the used equipment to
recycling, treatment and eco-friendly disposal will help avoid negative effects on the environment as well as on health
along with an easier recycling of the materials forming the equipment. Any unauthorized disposal of the product by
the user will imply the enforcement of the administrative sanctions as set out in Legislative Decree no. 22/1997 (article
50 and following articles, Legislative Decree no. 22/1997).
POSITIONING AND PREPARATION
The area where the machine is placed, should be well ventilated and dry, at a constant temperature between 17-23 °C.
Place the incubator on a flat, level surface and near to an electric socket for easy access. Use only the electric plugs
supplied, with earth connection.
PLEASE NOTE: The manufacturer declines every responsibility in case of any improper use or improper placement,
connection to any unauthorized apparatus or tampering from unauthorized personnel.
Thermometer: insert the thermometer into its clip on the right side and adjust it so that its bulb is level with the centre
line of the eggs.
IMPORTANT NOTICE
In order to comply with the latest CE specifications in terms of human safety from dangerous materials contained on
electric and non electric equipments we have been obliged to conform our mercury thermometers/hygrometers to
the actual rules via the replacement of the now forbidden mercury with colored alcohol.
Being this last one physically more volatile and subject to fragmentations, sometimes invisible because of his disco-
loration, the result is that the new thermometers are less reliable.
Consequently we ask our esteem customers &
distributors to pay the maximum attention before
using our thermometers, examining that there
are no gaps visible in the alcohol/liquid and while
storing caring them to be positioned vertically.
The adequate room temperature for storing our
thermometers is comprised between 10°C to
30°C.
Before using the machine, remember to clean it
carefully inside and outside, as shown in paragra-
ph "Care and Maintenance";
11