Personal Safety - Prowinch PWA Serie Manual De Usuario Y Advertencias De Seguridad

5. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the
need for the three wire grounded power cord and grounded power supply system.
6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of elec-
tric shock if your body is grounded.
7. Do not expose power tools to rain or wet conditions.Water entering a power tool will increase the risk of electric shock.
8. Do not abuse the Power Cord. Never use the Power Cord to carry the tools or pull the Plug from an outlet. Keep the Power Cord
away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately.Damaged Power Cords increase the
risk of electric shock.
9. When operating a power tool outside, use an outdoor extension cordmarked "W-A" or "W". These extension cords are rated for
outdoor use, and reduce the risk of electric shock.

PERSONAL SAFETY

10. Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while
tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in
serious personal injury.
11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from mov-
ing parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
12. Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the
Power Switch, or plugging in power tools with the Power Switch on, invites accidents.
13. Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part
of the power tool may result in personal injury.
14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the pow-
er tool in unexpected situations.
15. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be
used for appropriate conditions.
6