Service; Specific Safety Rules - Prowinch PWA Serie Manual De Usuario Y Advertencias De Seguridad

16. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for
which it is designed.
17. Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power
Switch is dangerous and must be replaced.
18. Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the
tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
19. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
20. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely
to bind and are easier to control. Do not use a damaged tool. Tag damaged tools "Do not use" until repaired.
21. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's oper-
ation. If damaged, have the tool serviced before using. Many accidents are caused by poorly
maintained tools.
22. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.

SERVICE

23. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified person-
nel could result in a risk of injury.
24. When servicing a tool, use only identical replacement parts. Follow instructions in the "Inspection, Maintenance, And Cleaning"
section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock
or injury

SPECIFIC SAFETY RULES

1. Maintain labels and nameplates on the Hoist. These carry important information. If unreadable or missing, contact the distribu-
tor, Northern Tool + Equipment for a replacement.
2. Always wear safety impact eye goggles and heavy work gloves when using the Hoist. Using personal safety devices reduce the
risk for injury. Safety impact eye goggles and heavy work gloves are available from Northern Tool + Equipment.
3. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always
keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chem-
icals, dusts, and vapors. Do not use this product in a damp or wet location
7