Stihl MSA 300.0 Manual De Instrucciones página 46

English
16.2 Removing the Battery
WARNING
To reduce the risk of severe personal injury from unintended
activation, always remove the battery before assembling,
transporting, adjusting, cleaning, servicing, maintaining or
storing the chain saw, and any other time it is not in use.
WARNING
Use care when ejecting the battery to prevent it from falling
and causing personal injury or property damage.
To remove the battery:
► Release the trigger switch.
► Place the chain saw on a level surface.
► Compress the locking levers (1) to eject the battery (2)
from the battery compartment.
NOTICE
Avoid exposing the battery to excessive heat or prolonged
periods of direct sunlight. Use or storage outside the
recommended ambient temperature range can reduce the
performance and/or service life of the battery.
44
17 Switching the Chain Saw On and Off
17.1 Switching On
Never operate your chain saw if it is modified, damaged,
improperly adjusted or maintained, not completely and
securely assembled or not functioning properly, @ 6.5. To
reduce the risk of personal injury, always wear proper
clothing and protective apparel, including proper eye
protection, when operating your chain saw, @ 6.3.
Before switching on:
► Make sure you have a secure and firm footing.
► Stand upright.
► Always hold and operate the chain saw with your right
2
hand firmly on the rear handle and your left hand firmly on
the front handle. Always hold the chain saw with two
hands in this manner, whether you are right-handed or
left-handed.
1
To switch the chain saw on:
► Disengage the chain brake, @ 15.2.
► Depress and hold the trigger switch lockout (1).
► While holding the trigger switch lockout, press the
retaining button (2) with your thumb and release it. The
"STATUS" LED (4) and the "POWER LEVEL" LED glow.
17 Switching the Chain Saw On and Off
WARNING
2
3
4
1
0458-009-8601-A