Stihl MSA 300.0 Manual De Instrucciones página 62

English
27 Combinations of Guide Bars and Saw Chains
27.1 STIHL MSA 300, MSA 300 C
Pitch Drive link
gauge/Groove
width
0.050 in.
.325"
(1.3 mm)
The guide bar and chain combinations listed above meet the
45° computed kickback angle requirement of UL 62841-4-1
when used on this model chain saw with the matching chain
sprocket listed above.
Use replacement guide bars or chains only as listed above
or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of UL 62841-4-1
when used on this model chain saw.
The following guide bars are green-labeled reduced
kickback STIHL guide bars:
– Rollomatic E / Light 04
– Drive link gauge/Groove width: 0,050 in. (1.3 mm)
– Length: 14 in. (35 cm), 16 in. (40 cm), 18 in. (45 cm)
and 20 in. (50 cm)
– Number of teeth of sprocket nose: 10
The following saw chains are green-labeled low kickback
STIHL saw chains:
– 23 RD3 Pro (Type 3696)
– 23 RM3 Pro (Type 3695)
– 23 RS3 Pro (Type 3694)
60
Length Guide bar
14 in.
(35 cm)
16 in.
(40 cm)
Rollomatic E /
Light 04
18 in.
(45 cm)
20 in.
(50 cm)
27 Combinations of Guide Bars and Saw Chains
Number of teeth Drive link
of sprocket nose count
60
67
10
74
81
Since new bar/chain combinations may be developed after
publication of this manual, ask your authorized STIHL
servicing dealer for the latest STIHL recommendations.
Saw chain
23 RD3 Pro (Type 3696)
23 RM3 Pro (Type 3695)
23 RS3 Pro (Type 3694)
0458-009-8601-A