Wet Vacuuming - Nilfisk-Advance Advenger 2800ST Instrucciones De Uso

WET VACUUMING

Steps to follow in fi tting the machine with optional attachments for wet vacuuming.
1 Disconnect the Recovery Hose (37) from the Squeegee (11). Connect the coupler and hose from the wand kit to the recovery hose.
2 Attach suitable wet pick-up tools to the hose. (An optional Wand Kit PN56601087 is available from Advance).
3 Turn the Master Key Switch (A) ON and press the Wand Switch (L) (Advenger models) or lower the Squeegee Lever (22) (ST models). NOTE: The operator cannot be in the
seat for the vacuum motor to run on Advenger models. The vacuum motor will run continuously until the switch is pressed again (Advenger models) or the squeegee is raised
(ST models) to turn it OFF. NOTE: The "Recovery Tank FULL" indicator is disabled when the wand mode is activated. The fl oat will stop the fl ow into the recovery tank.
SERVICE NOTE: Refer to the service manual for detailed functional descriptions of all controls and optional programmability.
FIGURE 6
F7
F8
F1
22
23
!
F
!
F5
F6
26
B
C
D
J
29
31
37
11
ENGLISH / A-15
G
H
I
L
A
A
18
14
3
FORM NO. 56041735 - Advenger
B
C
D
M
- A-15
™