Newlux X120 Smartmotion Manual De Instrucciones página 31

Turn off motion sensors
If the sensors malfunction, you can turn them off temporarily.
• Remove the safety key and hold down both speed buttons at the
same time.
• Release the speed buttons when you hear the buzzer.
Repeat this procedure to switch on the sensors.
IMPORTANT: The device must be properly earthed to ensure safe
operation. If the belt malfunctions, earthing reduces the risk of electric
shock.
Manual mode
• Press the ON/OFF switch.
• Place the safety key on the screen and attach it to your clothing.
• When the treadmill is on, press the START/ STOP button to enter
manual mode. After 3 s, the treadmill will start running at a speed
of 1 km/h.
• Set the desired speed with the '+' or '-' buttons.
• The maximum exercise time is 99:59 minutes. The time starts from
0.
Automatic programmes
Press the programme button "P" to enter automatic programme
selection and the display will show "PXX". Press the START/ STOP button
to select the programme.
It is divided into 20 segments and runs for 20 minutes. The speed of the
segments is according to each automatic programme. The segment
running time is 1 minute. When the programme changes to the next
segment, the speed is automatically adjusted. At the end of the
automatic programme, the treadmill gradually stops. Once the speed
is zero, it returns to the initial standby state automatically.
31 |