Newlux X120 Smartmotion Manual De Instrucciones página 37

Maintenance
The product incorporates a lubrication system to minimise belt friction
(14) on the platform, increasing the useful life of the device.
To find out if the device needs lubrication, touch the back of the strap
(14) with your hand as close to the centre as possible. If your hand feels
wet, you do not need to apply lubricant to the device. However, if your
hand feels dry, you will need to add lubricant.
When using the treadmill:
• Less than 3 hours per week, lubricate every 3-5 months.
• 4-7 hours per week, lubricate every 2 months.
• More than 7 hours a week, lubricate every month.
Follow the steps below:
• Turn on the treadmill and set it to manual mode at speed 2.
• Apply the lubricant as shown in the picture. Use 10 mL of the oil for
each application.
• After applying the lubricant, keep the treadmill running and gently
walk on it for 10 minutes. This ensures that the oil is absorbed and
spreads well.
IMPORTANT: Do not lift or move the treadmill during the lubrication
process, otherwise the oil may leak internally.
Oil inlet
OIL RESERVOIR
(use only special oil for
treadmill lubrication)
37 |