Newlux X120 Smartmotion Manual De Instrucciones página 36

CLEANING AND MAINTENANCE
WARNING
Before cleaning the treadmill, remove the mains plug from the
socket.
Cleaning
• Clean the main body with a soft, slightly damp cloth. Do not use
abrasive or corrosive products.
• Dry the device carefully and make sure all electrical parts are dry.
• Do not use any liquid or substance to clean the control panel.
• Clean the inside of the tilt belt (11) by loosening it via the treadmill
adjustment (12). To loosen and retighten the screw, use the Allen key.
Once loosened, place your hand under the tilt belt (11) and wipe the
surface with a cloth. When you have finished, put it back in its correct
position and tighten the treadmill adjustment screw (12).
• If there are stubborn stains from oil, grease or other dirt, use a cotton
cloth with mild detergent. Then use a dry cloth to remove excess
detergent.
• If you are not going to use the treadmill for a while, protect it from dust
and moisture; it is recommended to keep it in its original packaging.
| 36