JOCCA 6642 Manual De Instrucciones página 4

EN English
rrectly, always use JOCCA spare parts and acces-
sories.
- Before connecting the appliance to the mains,
check that the cable and plug are in perfect condi-
tions. Also check that the voltage indicated on the
appliance is valid for your electrical installation.
- If the power supply cable or the plug are damaged,
do not use the appliance or try to replace the cable
yourself. Contact the customer service where they
will replace it correctly for you.
-For your safety and for the appliance to work co-
rrectly, always use JOCCA spare parts and acces-
sories.
-Always use the AC/DC adaptor with the appliance;
never try to use it with another one even though it
might seem to have the same characteristics.
-Do not move the appliance when it is in use.
-Use the appliance on a flat surface.
-Completely unroll the power cable to avoid over-
heating.
-This appliance will be completely switched off when
it is unplugged from the mains.
WARNING: Switch off the machine and unplug the
adaptor in the following cases:
When carrying out any activity such as threading,
changing the needle or changing the bobbin.
While changing parts or while sewing.
When you finish using it.
During a power cut.
-When using the machine, pay special attention to
the needle and to the balance wheel, never push the
bobbin or the needle.
4